PANEL VE PLC İKİSİ BİR ARADA HARİKA BİR ÜRÜN.
Ürün Serisi HP043
Ürün Tipi Panel PLC
Besleme Voltajı 24V DC
Dijital Giriş/Çıkış 9 Dijital Giriş / 9 Dijital Çıkış (Transistör)
Analog Giriş/Çıkış 2 Termokupl Girişi
Genişleme Modülü Yok
Program Hafızası Maksimum 4K Adım
Yüksek Hızlı Sayıcı Girişi 4 (HSC0,HSC1:50Khz / HSC2,HSC3:20Khz)
Puls Çıkışı 2x50Khz(Q0.0, Q0.1) / 1x10Khz(Q0.4)
Haberleşme Portu 1xRS485
Gerçek Zaman Saati Var
Ekran Boyutu 4.3
HMI İşlemci 32-bit 400MHz RISC
HMI Bellek 128M FLASH + 32M SDRAM
HMI Reçete Belleği&RTC 256KB + RTC
HMI Genişletilebilir Hafıza 1 USB Host
Termokupl Seçenekleri J,K,E,S,T Tipi Termokupl
• USB Host Desteği
• 4.3“ Dokunmatik Ekran
• USB Port ile Program Yükleme
• 3 Adet HSC Çıkışı, 4 Adet HSC Girişi
• Modbus RTU ve Açık Protokol Desteği
Chapter 1 General Introduction
1.1 Summary
Kinco HMI-PLC combine HMI and PLC. It is Kinco ecomony integrated product.
Based on powerful functions、high performance and high reliability, Kinco improve hardware
designing of HMI-PLC. It cancel the wiring and communication of HMI and PLC, so it will
reduce cost.
Kinco HMI-PLC is integrated product with high price-performance ratio.
1.2 Product List
Item Type Specification HMI-PLC HP043-20DT
DC24V，DI 9*DC24V，DO 9*DC24V，2*AI
Communication port：1*RS485
Expansion：no
1.3 Environmental Condition
Kinco HMI-PLC accords with GB/T 15969.3-2007（idt IEC61131-2：2007）standard and test
specifications.
The following table lists the conditions and requirements for HMI-PLC to work properly. It is
the user’s responsibility to ensure that the service conditions are not exceeded.
Transport and storage
Ambient
conditions
temperature -10℃～+60℃
relative
humidity
10%~95%, no condensation
Altitude Up to 3000 m
Kinco-HP
User Manual
4
Mechanical
conditions
Free falls
within manufacturer’s original packaging, 5 falls from 1m
of height.
Normal Operation
Ambient
conditions
air
temperature
Open equipment : -10 — +55°C; Enclosed equipment: 0～
50℃
relative
humidity
10%~95%, no condensation
Altitude Up to 2000 m
Pollution
degree
for use in pollution degree 2.
Mechanical
conditions
Sinusoidal
vibrations
5<f<8.4Hz, Occasional: 3.5mm amplitude; Continuous:
1.75mm mplitude.
8.4<f<150, Occasional: 1.0g acceleration; Continuous:
0.5g acceleration.
Shock
occasional excursions to 15g, 11 ms, half-sine, in each of 3
mutually perpendicular axes.
Electromagnet
ic
compatibility
(EMC)
Electrostatic
discharge
±4kV Contact, ±8kV Air. Performance criteria B.
High energy
surge
a.c. main power: 2KV CM, 1KV DM;
d.c. main power: 0.5KV CM, 0.5KV DM;
I/Os and Communication port: 1KVCM.
Performance criteria B.
Fast transient
bursts
main power: 2KV, 5KHz. I/Os and Communication port:
1KV, 5KHz.
Performance criteria B.
Voltage drops
and
interruptions
a.c. supply: at 50Hz, 0% voltage for 1 period; 40% voltage
for 10 periods; 75% voltage for 20 periods.
Performance criteria A.
Ingress Protection Rating IP65
Kinco-HP
User Manual
5
1.4 specification
1.4.1 display specification
LCD size 4.3” TFT(16：9)
Resolution 480*272
Color 65536
Brightness 250cd/m2
Back light LED
Touch panel 4 lines，resistor web（4H）
Life 50000 hours
Memory 128M Flash+32M DDR
Recipe
memory
256KB+RTC
Expansion
memory
1 USB Host
Programming
download
1 USB
1.4.2 PLC specification
Parameters HP043-20DT
Power supply
Rated voltage DC24V
Voltage range DC20.4V－28.8V
I/O
communication
Digital IO 9*DI/9*DO
